Which Low Voltage LED and Which Driver?
LED light bulbs are now available in a range of low voltage replacements, and our range is constantly expanding as new products become available. We currently offer LED bulbs in MR16, MR11 and G4 capsules and care should be taken in the choice of power supplies for these bulbs. A lighting transformer (also known as a Driver, or with LED bulbs, they are called LED Drivers) is required to reduce the voltage from 240 volts to around 12 volts. Standard transformers operate with a minimum load requirement usually around 20W, and there is normally one transformer per bulb. Therefore a traditional transformer will not start if an LED bulb is fitted because LEDs operate on less than 20W. The transformers will either need to be replaced with LED Drivers which operate down to zero watts or connect several lamps into one transformer to meet the minimum load requirement.
The 0-10W LED Driver we offer is ideal to drive only one bulb or eg 3 x 3W LED bulbs. We highly recommend that LED bulbs and halogen bulbs are not run on the same circuit.
The 0-10W LED Drivers replace your existing transformers for individual or very small clusters of bulbs, and the 0-30W LED Driver can feed multiple LED Bulbs. Both are available here.
ليست هناك تعليقات:
إرسال تعليق